Actosed® PA Powder, is a high-level disinfectant in powder form, which is containing peracetic acid and used for the disinfection of medical instruments and endoscopes. Has bactericidal (including Tbc), fungicidal, virucidal and sporicidal action. Shows optimum efficiency with short contact time and provides safe usage. Thanks to its high cleaning power, it can be used for pre-cleaning and disinfection of medical instruments in all kinds of contamination. Actosed® PA Powder is a product that is suitable for daily use, and the minimum effective concentration (MEC) should be checked with the test strips during the duration of use. When Actosed® PA Powder is dissolved in water, peracetic acid is produced.
100 g contains <50 g Sodium percarbonate, <30 g TAED, corrosion inhibitors and auxiliary substances.
|Microbiological Activity||Test Method||Concentration||Effect Time|
|Bakterisidal (Including MRSA)||EN 13727 EN 14561||%1,62 (16,2 g/l)||5 minute|
|Fungucidal (C. albicans, A.brasiliensis)||EN 13624 / EN 14562||%1,62 (16,2 g/l)||10 minute|
|Tuberculocidal||EN 14348 / EN 14563||%1,62 (16,2 g/l)||10 minute|
|Virucidal(VAdeno, Polio, MNV)||EN 14476||%1,62 (16,2 g/l)||10 minute|
|Sporocidal(B. subtilis)||EN 13704||%1,62 (16,2 g/l)||10 minute|
Actosed® PA Powder has a wide material compatibility when used at recommended concentrations and durations of use. It is compatible with flexible and rigid endoscopes, anesthesia materials, surgical instruments made of stainless steel, thermoplastics, elastomer and glass materials. Product is not suitable for instruments with deteriorated coating nor instruments which are made of copper, brass and anodized aluminum material.
Material compatibility of Actosed® PA Powder has been tested and approved by KARL STORZ
Method of Preparation:
Fill the cuvette with warm tap water (30- 40°C). Add Actosed® PA Powder at the recommended ratio. Stir occasionally to form a clear solution. Wait for at least 15 minutes until all powder is dissolved.
Method of Use:
Make sure that all instruments and canals come into contact with the solution during application. Keep the lid of the disinfectant bath closed during use. After the recommended contact time, rinse the medical devices with water of at least drinking water quality, and dry. The solution should be prepared daily and should be replaced immediately in case of dirtiness.
|Unit||Pieces in Box||Article-No.|
|Test Strip – Pack of 25 pcs||1||14.4204.25|