ACTOSAL® PA Powder
High-Level Floor, Surface and Environment Disinfectant- Based on active oxygen system
- Floor and surface disinfectant with broad spectrum of action
- Bactericidal, fungicidal, tuberculocidal and virucidal activity
- Fast-acting, cleaning and disinfection
- Can be used in wiping form for floor and surfaces or in spraying form by preparing in spray packaging
- Can be applied by putting it in the air disinfection device
- Should be prepared at the appropriate concentration for the environment
![Actosal-PA-Powder-5kg-EN[1]](https://actopharma.com/dosyalar/Actosal-PA-Powder-5kg-EN1.jpg)
Properties
Actosal® PA Powder, does not contain alcohol, quaternary ammonium compounds, biguanide, aldehyde and phenol. The product prepared with water provides an easy and practical application. The ready solution has a pink color. Discoloration of the solution indicates that the activity of solution has decreased. When used according to the instructions for use, it does not adversely affect the personnel and the materials used.
Used for floor and surface disinfection in areas such as operating room, intensive care, laboratory, dialysis center and so on, for aerial disinfection of critical areas (terminal disinfection/fogging) and in incubators.
Chemical composition
Microbiological Activity
| Microbiological Activity | Test Method | Concentration | Effect Time |
|---|---|---|---|
| Bakterisidal | EN 13727 / EN 1656 / EN 1276 | 0.25 % | 5 min |
| Fungisidal (C.albicans, A.niger) | EN 13624 / EN 1657 / EN 1650 | 0.5 % | 5 min |
| Tuberculocidal Mycobactericidal | EN 14348 | 0.25 % | 5 min |
| Virusidal (Adeno, Polio, MNV) | EN 14476 | 0,5 % | 5 min |
Method of Use:
Fill the container that you want to prepare the solution in with water, then add Actosal® PA Powder accordind to the appropriate ratio. The powder should be stirred until it is completely dissolved. A clear, transparent, pink solution appears (5-10 minutes). It can be applied by mopping for disinfection and cleaning of floors and by wiping for other surfaces after every contamination.
It can be applied by putting into the device for environment disinfection.
This solution can be prepared within the spraying bottle for use by spraying for disinfection of surfaces.
1 liter of water- 5 g of Actosal® PA Powder
5 liter of water- 25 g of Actosal® PA Powder
10 liter of water- 50 g of Actosal® PA Powder
Concentration of Use
| Concentration Ratio | Amount of Water | Product Quantity |
|---|---|---|
| %0,5 | 1000 ml | 5 ml |
Packaging
| Article-No. | Unit | Pieces in Box |
|---|---|---|
| 05.5502.1 | 50 gr | 108 |
| 05.5502.1 | 1 kg | 10 |
| 05.5502.5 | 5 kg | 4 |